Sfp+ Port Led - HP 5130-24G-4SFP+ EI Installation Manual

Status
Flashing green
Steady yellow
Flashing yellow
Flashing yellow (3 Hz)
Off

SFP+ port LED

The HP 5130-24G-4SFP+ EI, HP 5130-24G-4SFP+ EI TAA, HP 5130-24G-PoE+-4SFP+ (370W) EI, and HP
5130-24G-PoE+-4SFP+ (370W) EI TAA switches provide two single-color LEDs for each SFP+ port to
indicate their operating status.
Table 23 SFP+ port LED description for the HP 5130-24G-4SFP+ EI/HP 5130-24G-4SFP+ EI TAA and HP
5130-24G-PoE+-4SFP+ (370W) EI/HP 5130-24G-PoE+-4SFP+ (370W) EI TAA switches
LED
Green LED
Yellow LED
The HP 5130-24G-SFP-4SFP+ EI, HP 5130-24G-SFP-4SFP+ EI TAA, HP 5130-48G-4SFP+ EI, HP
5130-48G-4SFP+ EI TAA, HP 5130-48G-PoE+-4SFP+ (370W) EI, and HP 5130-48G-PoE+-4SFP+ (370W)
EI TAA switches provide a double-color LED for each SFP+ port to indicate its operating status.
Table 24 SFP+ port LED description for the HP 5130-24G-SFP-4SFP+ EI/HP 5130-24G-SFP-4SFP+ EI
TAA, HP 5130-48G-4SFP+ EI/HP 5130-48G-4SFP+ EI TAA, and HP 5130-48G-PoE+-4SFP+ (370W)
EI/HP 5130-48G-PoE+-4SFP+ (370W) EI TAA switches
Status
Steady green
Description
The port is sending or receiving data at 1 Gbps.
A transceiver module is installed in the port. The port is operating at 100 Mbps,
and a link is present on the port.
The port is sending or receiving data at 100 Mbps.
POST has failed on the port.
No transceiver module is installed in the port, or no link is present on the port.
Status
Steady on
Flashing
Off
Steady on
Flashing (not 3 Hz)
Flashing (3 Hz)
Off
Description
A transceiver module is installed in the port. The port is operating at 10 Gbps and
a link is present on the port.
Description
A transceiver module is installed in the port. The port is
operating at 10 Gbps, and a link is present on the port.
The port is sending or receiving data at 10 Gbps.
•
No transceiver module is installed in the port, or no 10
Gbps link is present on the port.
•
The port mode LED is operating in PoE mode (applicable
to the PoE switch models.)
A transceiver module is installed in the port. The port is
operating at 1 Gbps, and a link is present on the port.
The port is sending or receiving data at 1 Gbps.
POST has failed on the port.
•
No transceiver module is installed in the port, or no 1
Gbps link is present on the port.
•
The port mode LED is operating in PoE mode (applicable
to the PoE switch models.)
53