Table of Contents
Advertisement
The HP 5130-48G-PoE+-4SFP+ (370W) EI, HP 5130-48G-PoE+-4SFP+ (370W) EI TAA, HP
5130-24G-SFP-4SFP+ EI, and HP 5130-24G-SFP-4SFP+ EI TAA switches provide three mounting positions:
one front mounting position (near the network ports), one mid-mounting position, and one rear mounting
position (near the power supplies).
To attach the mounting brackets to the switch:
1.
Determine the mounting position.
2.
Align one mounting bracket with the screw holes at the mounting position. Use M4 screws
provided with the switch to attach the mounting bracket to the chassis.
3.
Repeat step
2
to attach the other mounting bracket to the chassis.
Figure 4 Attaching a two-hole mounting bracket to the front mounting position on an HP
5130-24G-4SFP+ EI/HP 5130-24G-4SFP+ EI TAA switch
Figure 5 Attaching a two-hole mounting bracket to the rear mounting position on an HP
5130-24G-4SFP+ EI/HP 5130-24G-4SFP+ EI TAA switch
Figure 6 Attaching a four-hole mounting bracket to the front mounting position on an HP
5130-24G-SFP-4SFP+ EI/HP 5130-24G-SFP-4SFP+ EI TAA switch
10
Hide quick links:
Advertisement
Table of Contents
