HP 5130-24G-4SFP+ EI Installation Manual page 53

Switch model
The HP 5130-24G-4SFP+ EI, HP 5130-24G-4SFP+ EI TAA, HP 5130-24G-PoE+-4SFP+ (370W) EI, and HP
5130-24G-PoE+-4SFP+ (370W) EI TAA switches provide two single-color LEDs for each
10/100/1000Base-T Ethernet port to indicate their operating status. When one of the two LEDs is on, the
other is off.
Table 21 10/100/1000Base-T Ethernet port LED description for HP 5130-24G-4SFP+ EI/HP
5130-24G-4SFP+ EI TAA, and HP 5130-24G-PoE+-4SFP+ (370W) EI/HP 5130-24G-PoE+-4SFP+
(370W) EI TAA switches
Switch model
HP 5130-24G-4SFP+
•
EI
• HP 5130-24G-4SFP+
EI TAA
• HP
5130-24G-PoE+-4S
Port mode
LED (Mode) Status
status
green (PoE
mode)
Flashing green
(3 Hz)
Steady yellow
Flashing yellow
(3 Hz)
Off
Port mode
LED (Mode) LED
status
Green LED
N/A
Yellow LED
Steady
green (rate
Green LED
mode)
51
Description
•
The PD power requirement exceeds the port
PoE capacity.
•
The port fails to meet the power requirement of
the PD because of power insufficiency of the
switch.
A non-PD device is attached to the port, or the port
is experiencing a PoE failure.
POST has failed on the port.
The port is not supplying PoE.
Status Description
The port is operating at 1000
Steady on Mbps, and a link is present on
the port.
The port is sending or receiving
Flashing
data at 1000 Mbps.
No link is present on the port, or
Off the port is not operating at
1000 Mbps.
The port is operating at 10/100
Steady on Mbps, and a link is present on
the port.
Flashing (not 3 The port is sending or receiving
Hz) data at 10/100 Mbps.
Flashing yellow
POST has failed on the port.
(3 Hz)
No link is present on the port, or
Off the port is not operating at
10/100 Mbps.
The port is operating at 1000
Mbps, and a link is present on
Steady on
the port.