Table of Contents
Advertisement
Telephone settings
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows.
If you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. However, the year must be correct so that the day of the
week can be calculated from the caller ID information.
To manually set the date and time:
1. Press MENU when the handset is not in use.
to scroll to Set date/time, then press SELECT.
2. Press
or
to select the month then press SELECT, or use
3. Press
or
the dialing keys to enter a two-digit number (01-12).
4. Press
or
to select the date then press SELECT, or use
the dialing keys to enter a two-digit number (01-31).
to select the year then press SELECT, or use the
5. Press
or
dialing keys to enter a two-digit number (00-99) then
press SELECT.
6. Press
or
to select the hour then press SELECT, or use
the dialing keys to enter a two-digit number (01-12).
7. Press
or
to select the minute then press SELECT, or use
the dialing keys to enter a two-digit number (00-59).
to select AM or PM.
8. Press
or
9. Press SELECT to save the settings and return to the previous
menu. You hear a confirmation tone.
• If the date and time are not set when a message is recorded, the system
announces, "Time and date not set," before each message plays.
• The telephone plays two beeps if you enter an invalid number.
11
Set date/time
ECO
ANS ON
Date: MM/DD/YY
ECO
ANS ON
Time: HH/MM - -
ECO
ANS ON
Advertisement
Table of Contents
