Telephone operation
Handset speakerphone
When the handset is on a call, press
the handset speakerphone and the handset earpiece.
When the speakerphone is active, the handset displays
Speaker.
Volume control
• During a call, press /VOLUME or /VOLUME.
• The handset earpiece volume and speakerphone volume
settings are independent.
• When the volume reaches the minimum or maximum
setting, you hear two beeps.
Mute
The mute function allows you to hear the other party but the
other party cannot hear you.
• During a call, press MUTE on the handset. The screen
displays Muted until the mute function is turned off.
• Press MUTE on the handset to resume the conversation. The
screen briefly displays Microphone on.
Find handset
This feature helps you find misplaced handsets.
To start the paging tone:
• Press /FIND HANDSET at the telephone base. All idle
handsets ring and display ** Paging ** .
To stop the paging tone:
• Press
, OFF,
) on the
-OR-
FIND HANDSET at the telephone base.
• Press
/
-OR-
• Place the handset in the telephone base.
Press MUTE to turn off the ringer of that handset. Its screen shows Ringer muted
and
.
or any dialing key (0-9,
handset.
to switch between
or
18
Muted
ECO
ANS ON
10:01
AM
8/20
Microphone on
ECO
ANS ON
AM
8/20
10:01
** Paging **
ECO
ANS ON