Address Setting; Wiring; Status Indicator - Bosch AMAX 2100 Installation Manual

AMAX panel
2.
3.
4.
P
4.6.2

Address Setting

Set the rotary switch to 6 which corresponds to option bus address 134.
4.6.3

Wiring

The following graphic shows how to wire B450 to the option bus of the AMAX panel.
AMAX 2100 / 3000
AMAX 3000 BE / 4000
Figure 4.8: Wiring of B450 with an AMAX panel
4.6.4

Status Indicator

B450 with B442 or B443 provide several LED indicators. The following table describes the
heartbeat LED indicator of B450 and the status LED indicator of B442 or B443 (blue).
LED Condition
Heartbeat LED of B450
Status LED of B442 or
B443
Table 4.11: B450 with B442 System Status Indicator
Bosch Sicherheitssysteme GmbH
Use the standard three-hole installation mode to install B450 in the enclosure of the
AMAX panel or another enclosure. For more information refer to Module Installation, page
26 and to B450 Conettix Plug-in Communicator Interface.
Instert SIM card into B442.
Insert B442 into B50.
B442 clicks and the module combination is ready to be wired.
On
Stable flash
3 quick flashes
Off
Stable flash
3 quick flashes
Off
Optional Modules and Peripheral Devices | en
Denotation
Trouble Condition
Normal Operation
Communication error
Power failure or other failure conditions
Normal Operation
Communication error
Power failure or other failure conditions
Installation Manual
21
B450
2015.05 | 06 | F.01U.309.277