Table of Contents
Advertisement
Instructions for use
Press repeatedly the button A until the display
shows the symbol C1 (Fig. 2.21)
The symbols shown in Fig. 2.21 appears in the
display.
Press the "OK" button C. Each time the button is
pressed the display shows the details of the next
setting.
Changing or deleting the timed settings
Press repeatedly the button A until the display
shows the symbol C1 (Fig. 2.21)
The symbols shown in Fig. 2.21 appears in the
display.
Press the "OK" button C until the display shows
the setting to be modified or deleted.
The time setting can be modified now by pressing
button D or E and the operation can be switched
on or off by pressing the button F.
To delete a time set press the button D or E until the
symbols shown in Fig. 2.21 appears in the time
display G.
The new settings are memorised by pressing the
button A.
Manual operation
The operation of the time switch can be forced on
or off constantly or for a timed period.
To force constantly on or off the timer operation
press repeatedly the button A until the display
shows the symbol TIMER. The symbols shown in
Fig. 2.24 appears on the display.
Fig. 2.24
The operation can be switched permanently on or
off by pressing the button F and leaving the dis-
play shows the symbol TIMER.
10
To force a timed delay on or off operation, press
repeatedly the button A until the display shows the
symbol TIMER.
Set the time delay by pressing the button D or E
and the operation can be forced on or off by pres-
sing the button F.
The time delay can be set within the following
ranges:
1 to 23 hours with steps of 1 hour
1 to 27 days with steps of 1 day
Press the button A until the display shows the sym-
bol AUTO.
The ON--- OFF display H flashes indicating that the
current state of operation has been forced.
To delete the timed delay setting, press repeatedly
the button A until the display shows the symbol
TIMER, press the button D or E until the symbols
shown in Fig. 2.25 appears in the display and then
press the button A until the display shows the sym-
bol AUTO.
Setting example shown in Fig. 2.25:
forced ON state for 4 hours.
Fig. 2.25
Note:If during manual operation, power supply
turns off, timer must be set again following previ-
A
ous steps
Resetting
To completely reset the timer, press the reset but-
ton with a pointed object (pencil).
CAUTION: pushing the reset button will complete-
ly erase the settings as well as all the data, includ-
ing the current time.
A
Advertisement
Table of Contents
