Switching Keymaps; Activating Door Relay - Mitel MiVoice Office 250 User Manual

Switching Keymaps

Keymaps are the default button assignments on your IP phone. Your system administrator may
have programmed an alternate keymap, allowing you to switch between keymap assignments.
Contact your system administrator for more information.
To switch between keymaps when your IP phone is idle:
To switch between keymaps during a call:

Activating Door Relay

If the Activate Door Relay feature is enabled, you can unlock a door (i.e., "buzz" it open)
through your IP phone.
You can enter the Activate Door Relay feature code while idle or while on a call. This allows you
to activate the feature while talking to a communications device mounted at the door without
first having to hang up. When activated while on a call, the feature will not affect the call in
progress other than to show a short confirmation on the display.
You can add the Activate Door Relay feature to a phone keymap button, just like any other
station feature.
To unlock a door:
With the handset on-hook, dial 399. The display shows either ALTERNATE (or)
STANDARD KEYMAP IS ACTIVE.
Press (Special), and then dial 399.
While idle or while on a call, dial 332. The door is unlocked.