Connecting Two Units - Casio fx9750G User Manual

Hide thumbs Also See for fx9750G:

Table of Contents

20-1 Connecting Two Units

The following procedure describes how to connect two units with an optional SB-62

connecting cable for transfer of programs between them.

u u u u u To connect two units

1. Check to make sure that the power of both units is off.

2. Remove the covers from the connectors of the two units.

• Be sure you keep the connector covers in a safe place so you can replace them

after you finish your data communications.

3. Connect the two units using the SB-62 cable.

• Keep the connectors covered when you are not using them.