Casio fx9750G User Manual page 10

k k k k k Graphic Display and Text Display
The unit uses both a graphic display and a text display. The graphic display is used
for graphics, while the text display is used for calculations and instructions. The con-
tents of each type of display are stored in independent memory areas.
u u u u u To switch between the graphic display and text display
Press !6(G ↔ T). You should also note that the key operations used to clear
each type of display are different.
u u u u u To clear the graphic display
Press !4(Sketch) 1(Cls) w.
u u u u u To clear the text display
Press A.
k k k k k Editing Calculations
Use the d and e keys to move the cursor to the position you want to change, and
then perform one of the operations described below. After you edit the calculation,
you can execute it by pressing w, or use e to move to the end of the calculation
and input more.
u u u u u To change a step
Example To change cos60 to sin60
cga
ddd
s
u u u u u To delete a step
To change 369 × × 2 to 369 × 2
Example
dgj**c
ddD
Before Starting Calculations...
1 - 1
23