Casio fx9750G User Manual page 199

k k k k k Continuous Drawing
When the Dynamic Graph draw type (Dynamic Type) is set to continuous (Cont),
drawing of the Dynamic Graph continues until you press A.
Example To continuously draw the same graph that you input in the
previous example (page 210)
Display the coefficient value specification display, and specify Cont as the draw type.
!Z1(Cnt)
J
Start drawing of the Dynamic Graph.
6(DYNA)
• Pressing A while the Dynamic Graph is being drawn changes to the drawing
speed setting display. The draw operation is suspended at this time, and you can
view the graph by pressing !6 (G ↔ T).
• Selecting Cont and then executing a Dynamic Graph operation causes the
graphing operation to repeat until you press A. Be sure that you do not forget to
stop the Dynamic Graph operation after you are finished. Allowing it to continue
will run down the batteries.
Drawing a Dynamic Graph
1 2 3 4 5 6
1 2 3 4 5
13 - 3
6
↑
↓
215