Data Communications; Connecting Two Cfx-9800G Units; Before Starting Data Communications - Casio CFX-9800G Service Manual & Parts List

11. DATA COMMUNICATIONS

• Though you can transfer programs between the CFX-9800G and another CFX-9800G, an fx-
7700GB, an fx-7700GE an fx-7700GH, an fx-9700GE, an fx-9700GH, an OH-7700GE, an OH-
9700GE or an fx-8700GB, all of the examples in this manual cover data transfer with another
CFX-9800G only.

11-1. Connecting Two CFX-9800G Units

The following procedure describes how to connect two Power Graphic units with an optional SB-62
connecting cable for transfer of programs between them.
To Connect Two CFX-9800G Units
1. Check to make sure that the power of both CFX-9800G units is off.
2. Remove the covers from the connectors of the two Power Graphic units.
• Be sure you keep the connector covers in a safe place so you can replace them after you
finish your program communications.
3. Connect the two units using the SB-62 cable.
Important
• Keep the connectors of the CFX-9800G covered when you are not using them.

11-2. Before Starting Data Communications

Before actually starting data communications, you should first enter the LINK Mode from the Main
Menu.
To Enter the LINK Mode
Highlight the LINK icon on the Main Menu.
Press to display the LINK Mode.
EXE
EXE
The following are the operations that can be selected from the function menu at the bottom of the
display. Press the function key below the operation you want to perform.
(TRN) ............. Transmit
F1
(RCV) ............. Receive
F2
(SET) ............. Set up display
F6
SB-62 cable
COMMUNICATION
PARITY : EVEN
BPS : 9600
M–D/Cpy : M–Disp
TRN RCV
F1 F2
— 17 —
SET
F6