Connecting Two Units - Casio FX-9750G PLUS User's Manual & Technical Reference

21-1 Connecting Two Units

The following procedure describes how to connect two units with an optional SB-
62 connecting cable for transfer of programs between them.
u u u u u To connect two units
1. Check to make sure that the power of both units is off.
2. Remove the covers from the connectors of the two units.
3. Connect the two units using the SB-62 cable.
400
• Be sure you keep the connector covers in a safe place so you can replace
them after you finish your data communications.
• Keep the connectors covered when you are not using them.
SB-62 cable