Garmin 500 Series Installation Manual page 77

CHAN 2 INPUT
Selection
Off
Ryan TCAD
CHAN 2 OUTPUT
Selection
Off
Ryan TCAD
CHAN 3 INPUT
If Crossfill is selected for channel 3 output, then Crossfill is automatically selected for the channel 3 input.
CHAN 3 OUTPUT
Selection
Off
Crossfill
CHAN 4 INPUT
Selection
Off
WX-500
CHAN 4 OUTPUT
Selection
Off
WX-500
FUEL TYPE
Selection
AV gas
Jet A
Jet B
Page 5-4
Page Rev. B
Description
No unit(s) connected to channel 2 input
Traffic information from a Ryan TCAD 9900B Series system.
Description
No unit(s) connected to channel 2 output
Serial communication with a Ryan TCAD 9900B Series system.
Description
No unit(s) connected to channel 3 output
Serial transfer of flight plans and user waypoints between two 500 Series units
Description
No unit(s) connected to channel 4 input
Lightning strike information from a BF Goodrich WX-500 Stormscope.
Description
No unit(s) connected to channel 4 output
Serial communication to a BF Goodrich WX-500 Stormscope.
Description
The aircraft is using Aviation gas (5.8 lbs./gal.)
The aircraft is using Jet A or Jet A-1 fuel (6.7 lbs./gal.)
The aircraft is using Jet B (JP-4) fuel (6.5 lbs./gal.)
500 SERIES INSTALLATION MANUAL
P/N 190-00181-02