Garmin GPSMAP 400 Series Quick Reference Manual

Finding a Marine Service and Navigating to It
To begin navigating:
1. From the Home screen, select Where To?.
2. Select a category.
3. Select a destination.
4. Select Navigate To.
5. Select Go To.
OR
Select Guide To when using a
preprogrammed BlueChart ® g2 Vision ® card
to use Automatic Guidance.
6. Follow the colored line on the screen to the
destination.
To stop navigating:
From the navigation chart, press MENU,
and select Stop Navigating.
Searching for a Destination by Name
1. From the Home screen, select Where To? > Search by Name.
2. Use the Rocker to select characters and spell at least a portion of the name of your
destination.
3. Press SELECT to view the 50 nearest destinations that contain your search criteria.
To go to the location, select the location > Navigate To > Go
Enter the Name
View the Search
Results
Marking a Waypoint or Man Overboard (MOB)
To mark your current location as a waypoint or as an MOB:
1. From any screen, press MARK.
2. Select Back to save the waypoint, or select Man
an MOB point.
To create a new waypoint:
1. From the Home screen, select Charts > Navigation
2. Use the map pointer (
designate as a waypoint.
3. Press SELECT.
4. Select Create
To move the waypoint on the Navigation chart:
1. Use the map pointer (
Navigation chart and press SELECT.
2. Select Review. (The Review button is only shown when more than
one waypoint is in the vicinity.)
3. Select the button for the waypoint you want to edit > Move.
4. Press SELECT to save the new location.
To edit an existing waypoint:
1. From the Home screen, select Information > User Data
2. Select the waypoint you want to edit.
3. Select Edit Waypoint.
To.
4. Select the waypoint attribute you want to change (Name, Symbol, Depth, Water
Comment, or Position).
To delete a waypoint or an MOB:
1. From the Navigation chart, use the map pointer (
on the Navigation chart.
OR
From the Home screen, select Information > User
2. Select the waypoint or the MOB you want to delete.
3. Select Review > Delete
is in the vicinity.)
Overboard to designate the waypoint as
Chart.
) to select the location you want to
Waypoint.
) to highlight the waypoint on the
Create a Waypoint
Editing or Deleting a Waypoint
> Waypoints.
) to highlight the waypoint or the MOB
Data > Waypoints.
(The Review button is only shown when more than one waypoint
GPSMAP ®
quick reference guide
Temp,
400/500 series