Garmin 500 Series Installation Manual page 47

4.10.3 DME Tuning Configuration
Refer to section 5.2.11 for the DME tuning configuration.
4.10.4 DME Tuning Calibration and Checkout
None.
4.10.5 DME Tuning Interconnect
Refer to Figure 4-22 on page 4-65 for the King Serial Panel DME tuning interconnect. Refer to Figure 4-23
on page 4-67 for the King Serial Remote DME tuning interconnect. Refer to Figure 4-24 on page 4-69 for
the parallel 2 of 5 DME tuning interconnect. Refer to Figure 4-25 on page 4-71 for the parallel BCD/Slip
Code DME tuning interconnect.
NOTE
For the GNS 530 to tune a Narco DME 890 or IDME 891 using parallel 2 of 5, unique wiring and
configuration are required. Refer to section 5.2.11 on page 5-10 and Figure 4-24 on page 4-69.
Page 4-20 500 SERIES INSTALLATION MANUAL
Page Rev. B P/N 190-00181-02