Garmin 500 Series Installation Manual page 6

1.3.2 General Specifications
Operating Temperature Range
Humidity
Altitude Range
Input Voltage Range (GPS 500)
Input Voltage Range (520/530)
Power Requirements—P5001
(GPS 500 Main Connector)
Power Requirements—P5001
(GNC 520 Main Connector)
Power Requirements—P5001
(GNS 530 Main Connector)
Power Requirements—P5002
(520/530 COM Connector)
Superflag Power Requirements
Software
Environmental Testing
1.3.3 GPS Specifications
Regulatory Compliance
Acquisition Time
Max Velocity
Dynamics
Page 1-2
Page Rev. B
-20°C to +55°C. For more details see Environmental
Qualification Form
95% non-condensing
-1,500 ft to 50,000 ft
11 to 33 V
DC
22 to 33 V
DC
TBD A @ 27.5 V ;
DC
TBD A @ 13.75 V
DC
TBD A @ 27.5 V (maximum)
DC
1.8 A @ 27.5 V (maximum)
DC
10 mA @ 27.5 V (not transmitting);
DC
3.0 A @ 27.5 V (transmitting)
DC
500 mA max. per superflag output @ 27.5 V
1.0 A max. @ 27.5 V on P5001 (Main Superflags)
DC
1.0 A max. @ 27.5 V on P5006 (VOR/LOC, G/S Superflags)
DC
RTCA DO-178B level C
RTCA DO-160C.
For more details see Environmental Qualification Forms
TSO C129a, RTCA DO-208
a) Search-the-Sky (without almanac, without initial position
or time): 5 minutes
b) AutoLocate ™ (with almanac, without initial position or
time): 5 minutes
c) Cold Start (position known to 300 nm, time known to 10
minutes, with valid almanac): 45 seconds
d) Warm Start (position known to 10 nm, time known to 10
minutes, with valid almanac and ephemeris): 15 seconds
1000 kts.
6 g
500 SERIES INSTALLATION MANUAL
DC
P/N 190-00181-02