Table of Contents
Advertisement
post alarm buffer setting, please refer to "3.6.3 Alarm".
6. Check "Enable This Event".
7. Select "Always" for time mask. For detail about Time Mask, please refer to
"3.6.4 Time Mask".
8. Click
3.6.2 Motion
Motion Detection
User can define the motion area to be detected by left clicking the mouse to draw
lines. Every click is an end point of the line. When the detection area is formed,
double click the mouse to have all the lines connected. To remove the selection,
simply right click the mouse, the selected polygon will be deleted.
Press
Press
to have the entire screen selected for motion detection.
Press
to clear all selections.
Press
and click on the polygon, to erase that polygon.
to save this event in event list.
to update the current image.
31
EDN800
Advertisement
Table of Contents
