Table of Contents
Advertisement
The Snapshot button saves a snapshot of the video image currently being displayed.
The location where the snapshot data is saved can be specified in Setting -> User's
Config. Please refer to "3.2 User Config" for further information.
○
Manual Control – Trigger Event
9
Press "Trigger Event" button to trigger an event directly from live view page, and
event actions will be effective if they have been set in "Event" menu.
○
Manual Control – Reset Alarm
1 0
Press "Reset Alarm" button to reset alarm output remotely.
○
Status Display
1 1
The name of the camera whose settings currently being configured, current date/time
and current frame rate will be displayed.
○
Event signals
1 2
Alarm
When an alarm or motion event is triggered, a signal icon will flash to alert user.
The first icon is for alarm event and rest of the 5 icons are for motion event. The
motion event icons which differed by colors correspond to the motion trigger areas
you have set in Motion menu. Please refer to "3.6.2 Motion" for detailed information
about Motion setup.
Motion
9
EDN800
Advertisement
Table of Contents
