Advertisement
STEP 9 (See Diagram 9)
A.) Attach the Vertical Press Base (#23) to the pivot on the Rear Vertical Frame (#7). Secure it
with one Axle (#59), two Ø ¾" Washers (#21), and two M10 Aircraft Nuts (#18).
B.) Attach one Vertical Press Arm (#24) to the Vertical Press Base. Secure it with two M10 x 2
½" Carriage Bolts (#98), Ø ¾" Washers (#21), and M10 Aircraft Nuts (#18).
C.) Repeat the same procedure to install the other Vertical Press Arm.
16
DIAGRAM 9
Advertisement
