Advertisement
STEP 5 (See Diagram 5)
A.) Do not tighten all Nuts and Bolts in this step until instructed to do so.
B.) Place the Upper Frame (#8) onto the Right Vertical Frame (#5) and two Guide Rods (#4).
Secure the Upper Frame to the Right Vertical Frame with two M10 x 2 ½" Carriage Bolts (#98),
one 4 3/8" x 1 ¾" Bracket (#84), two Ø ¾" Washers (#21), and two M10 Aircraft Nuts (#18).
C.) Secure the Upper Frame to the two Guide Rods with two M10 x 1" Allen Bolts (#94) and Ø ¾"
Washers (#21).
D.) Place the Top Socket Assembly (#9) onto the two Guide Rods on the rear. Secure them with
two M10 x 1" Allen Bolts (#94) and Ø ¾" Washers (#21).
E.) Connect the Top Socket Assembly (#9), Rear Vertical Frame (#7), Upper Frame (#8) and Left
Vertical Frame (#6) together. Align the holes and secure them with two M10 x 2 ½" Carriage
Bolts (#98), Ø ¾" Washers (#21), and M10 Aircraft Nuts (#18).
11
Advertisement
