B) Motion Area Setup - Night Owl AHD10 Series User Manual

Buzzer: Enable an audible alarm when the PIR sensor detects heat.
Sensitivity: Adjust the sensitivity of the motion sensor. A lower setting will require
more movement in the camera's field of view for a recording to be triggered.
Motion Area: Selecting Setup will allow you to configure which areas in the
cameras field of view will and will not detect motion. Red boxes denote areas that
will detect motion and uncolored boxes denote areas that will not. When finished,
right click to return to the menu.
Post Recording: Determine how long you would like the camera to continue recording
after the event which triggered the recording has ended. You can choose between 30
and 300 seconds.
Show Message: Checking this tick box will result in a red "M" appearing on-screen
when motion is detected while in Live View.
Send Email: Checking this tick box will result in an email alert being sent when
motion is detected. See section 7.1.2 for email setup and configuration.
Full Screen: Checking this tick box will result in the selected channel going to full
screen when motion is detected.
Push Notification: Checking this tick box will result in push notifications being
sent to your mobile device when motion is detected on the selected channel. By
default, this setting is enabled.
Record Channel: This option allows you to set other cameras to begin recording
when motion has been detected on another camera. For instance, if you are on
Channel 1 (Channel field) you can set Channel 2 and 3 to begin recording when
motion is detected on Channel 1.
7.1.4 (b)
Motion Area Setup
This system uses both motion sensors and infrared sensors to ensure the number
of false alerts produced are minimal. Current motion detection technology allows
50 AHD10 Series User's Manual