Great Dane Chariot GCHKW1948S Owner's/Operator's Manual page 14

Neutral Lock Position
Neutral Position
Figure 5
The steering levers control speed, directional
control, and stopping unit. The farther forward
or backward that the levers are moved, the
faster the unit will travel (see figure 6).
• Reverse (1) – Pull both steering levers
backward.
• Forward (2) – Push both steering
levers forward.
• Left (3) – Pull left steering lever back
or push right steering lever forward or
a combination of both.
• Right (4) – Pull right steering lever
back or push left steering lever
forward or a combination of both.
To stop, return both steering levers to neutral.
1
3 Figure 6
NOTE: Aggressive turning can scuff or
damage lawns. ALWAYS keep both wheels
rotating when making sharp turns. DO NOT
make turns with inside wheel completely
stopped. To obtain minimum turning radius,
slowly reverse inside wheel while moving
outside wheel slowly forward.
Parking Brake Lever
Mower Lift Pedal
Raises and lowers mower deck to allow deck
height adjustment pin to be positioned.
NOTE: Adjust seat position so that operator
can reach and fully depress deck lift pedal
(see SEAT ADJUSTMENT on page 31).
1
1. Mower Lift Pedal
2. Deck Height Adjustment Pin
3. Deck Lock Lever
2
To raise and lower deck press forward on
mower lift pedal (1) until deck height
adjustment pin (2) can be repositioned.
Place deck height pin at desired cut height
and release pressure from mower lift pedal.
If deck is in transport position (fully raised)
press deck lock lever (3) forward while
releasing pressure from mower lift pedal.
Use mower lift pedal to raise deck to clear
obstacles such as high spots by pressing and
holding pedal until obstacle is cleared.
Release pedal to return to previous mowing
4
height.
GB - 14
Engages (2) and
disengages (1) parking
1
brake.
Push lever forward to
disengage (1) parking
brake.
Pull lever backward to
engage (2) parking brake.
2
3
2
Figure 7