Eton E100 Operation Manual page 11

WORKING WITH MEMORY
DELETING ALL MEMORY CONTENTS OF A PAGE
1. Press/release the M.Scan/Page button (7).
2. Press/hold the Mem.&Edit button (15) for 4 seconds and then
release it. 'Del' (39) appears flashing in the display.
3. Within 2 seconds, press/release the Mem.&Edit button.
CUSTOMIZING MEMORY PAGES
The E100 is configured at the factory with 8 memory pages, each
page having 25 memories, for a total of 200 memories. You can
change this set-up. The number of memory pages can be set to your
choice of 4, 5, 8 or 20. This changes the number of frequencies stored
per page, but in all cases, 200 total frequencies can be stored. To see
the details of these changes and to make these changes please see
the instructions titled SYSTEM SET CODE TABLE, on Pages 21-23.
20
continued
8 SYSTEM SET CODES AND THE SYSTEM SET
CODE TABLE
Please review the System Set Code Table, below. System Set Codes
allow the radio to be tailored to your needs by changing certain
programmable functions. These functions and their descriptions are
noted in the table.
CODE DESCRIPTION
NO.
01* Alarm uses radio station on page 1, Mem 1
02* Alarm uses last radio station tuned
04 Divide the memories into 4 pages with
50 locations
05 Divide the memories into 5 pages with 40 locations
08 Divide the memories into 8 pages with 25 locations
20 Divide the memories into 20 pages with 10 locations
09* Set the tuning steps for MW (AM) to 9KHz
10* Set the tuning steps for MW (AM) to 10KHz
12* Set the clock system to 12Hr
24* Set the clock system to 24H
22 Check all the segments on LCD display and model no. All LCD
28* Rechargeable battery to be used
29* Normal AAA battery to be used
76* Set the FM frequency range to 76-108MHz (Japan)
88* Set the FM frequency range to 87-108MHz
(N. America; Western Europe)
E100 OPERATION MANUAL
SHOWN IN
DISPLAY
AL. 1
AL. 2
P4: 50
P5: 40
P8: 25
P20:10
9KHz
10KHz
12H
24H
segments show
1.2
1.5
76 108
87 108
21