Multi-Channel Audio System; Beep (Confi Rmation Tone); Setting Color - Blaupunkt CCU 02 MP3 PROFESSIONAL Operating Instructions Manual

DSC menu
• "SHARX ON/OFF": Switches the SHARX
function on or off.
• "BEST/SENSE": Select SENSE so that
the radio can also receive weak sta-
tions.
• "EUROPE / NAFTA": Select the frequen-
cy band EUROPE or NAFTA countries.

Multi-channel audio system

If the bus is equipped with a multi-channel
audio system (MAS) for the connection of
headphones at the seats, you must activate
MAS in the DSC menu.
Note:
If MAS is activated, all audio sources
connected to the CCU 02 are perma-
nently in operation.
u Press the DSC button <.
u
Select " DSC" with the right rotary/
*
pushbutton :.
The display shows "CODE".
u Press the left I and the right rotary/
pushbutton : at the same time for
confi rmation.
u
Select " SYSTEM" with the right rota-
*
ry/pushbutton I.
u Press the right rotary/pushbutton :.
u Press the right rotary/pushbutton :
repeatedly until the desired setting
"MAS ON" or "MAS OFF" is displayed.
u Hold the ESC ; button pressed until a
beep sounds and the menu is exited.
72
BEEP (confi rmation tone)
The confi rmation tone, which follows after
certain actions, can be switched on or off.
Press the DSC button <.
u
u
Select " DSC" with the right rotary/
*
pushbutton :.
The display shows "CODE".
u Press the left I and the right rotary/
pushbutton : at the same time for
confi rmation.
u
Select " SYSTEM" with the right rota-
*
ry/pushbutton I.
u Press the right rotary/pushbutton :.
u Turn the right rotary/pushbutton :
until "BEEP" appears.
u Press the right rotary/pushbutton :.
To set the "BEEP" volume 1 - 9 or OFF,
turn the right rotary/pushbutton :
u
accordingly to the left or the right.
u Hold the ESC ; button pressed until a
beep sounds and the menu is exited.

Setting color

For the button illumination of the CCU 02
and the button and display illumination of
a connected CVX 02, you can select among
the colours RED, GREEN and YELLOW.
u Press the DSC button <.
u
Select " DSC" with the right rotary/
*
pushbutton :.
The display shows "CODE".
u Press the left I and the right rotary/
pushbutton : at the same time for
confi rmation.
u
Select " SYSTEM" with the right rota-
*
ry/pushbutton I.