Tape Operation; Inserting A Tape; Removing A Tape; Prog Selector - Blaupunkt Montreux RCM 45 Operating Instructions Manual

Tape operation

Inserting a tape

• Turn on the set.
• Insert a tape.
Insert the tape with side A or 1 showing up, the
open side facing to the right.
= Press to eject the tape.
The tape will be played in the direction used
last.
"TR1--..." in the display means that track 1 or
A is being played.

Removing a tape

• Press .
The cassette will eject.

PROG selector

(To change the tape direction during
cassette playback)
• Press FR and FF simultaneously.
At the end of a tape side, the mechanism
changes directions automatically to play the
other side (Autoreverse). The display shows
28
"TR1--..." for track (side) 1 or A or "TR2--..."
for track 2 or B.
Notice:
If there is too much tension on the tape during
playback, the set may switch over by itself
before having reached the end of the tape
side. In this case check the condition of the
cassette tape. Sometimes it helps to rewind
it completely.

Fast Forward/Rewind

Fast Forward
• Press FF.
At the end of a tape side, the mecha-
nism changes directions automatically
to play the other side.
Stopping Fast Forward operation
• Press FR.
Fast Rewind
• Press FR.
At the beginning of the tape, the me-
chanism will automatically start play-
back.
Stopping Fast Rewind operation
• Press FF.

Tape equalisation with MTL

Switch on the MTL function to select the best
equalisation response when using metal or
CrO tapes. "...--MTL" will light up in the
2
display.
To switch MTL on/off:
• Press the MTL button repeatedly during
tape operation until the desired conditi-
on is displayed ("MTL ON" or
"MTL OFF").
Switching the audio source
with SRC (Source)
Using this function you can switch between
radio, tape and CD changer (optional) opera-
tion or playback of any other connected de-
vice.
To switch over:
• Press the SRC button.