Contents Front Panel Description ... 13 Important information ... 14 What you need to know! ... 14 Traffic safety ... 14 Installation/connection ... 14 Anti-theft coding ... 15 Wrong code number entered ... 15 Switching the code system on ... 15 Restart following interruption of power supply ...
Front Panel Description 1 ON/OFF Switch the set on/off by turning the knob. If “COD” appears on the display, read the chapter “Anit-theft coding” first. Volume control: By turning the knob SCAN (search operation): During radio reception, the stations are briefly sampled by pressing the knob for approx.
If you like to install your new car radio by yourself or add other audio components to the existing ones, then please read carefully the enclosed instructions on installation and connection. Do not connect the loudspeaker outputs to ground! Only use the accessory and replacement parts approved by Blaupunkt.
Briefly press preset button 1, “000” will appear in the display. • Enter the code number given in the Blaupunkt car radio passport: Preset button 1 only allows to choose “0” or “1”. The first “0” will not be dis- played.
• Turn the set on. “COD” will appear in the display. • Enter the code number given in the Blaupunkt car radio passport and con- firm: See example “Restart following interruption …”. The code system is now deactivated. Amplifier Section...
Adjusting the Station Seek Sensitivity With this set you can modify the station seek sensitivity. If you want to search for strong stations only (reduced sensitivity): • Press the lo rocker switch 5 until “lo” lights up on the display >. If you also like to search for weaker stations (increased sensitivity): •...
Activating a Stored Station If required, the memorized stations can be activated at a keystroke. • Choose the storage level. For this, press FM•T A until display = shows I, II or III, or T. • Briefly press the corresponding preset button B.
Acoustic Alarm When leaving the coverage area of the tuned in traffic station, your car radio automatically sends out an acoustic alarm after approxima- tely 30 seconds. This alarm tone can also be heard when pressing a preset button with no ARI station allocated to it.
Care Notes We recommend C-60 and C-90 type tapes for use in any automobile tape player; to protect your tapes, store them in a cool place away from dirt, dust, or excessive temperatu- res above 50° Celsius. In order to ensure smooth tape operation, cold tapes should be allowed to heat up a bit before they are played.