Digicom Tiziano 56 Memory User Manual page 30

Tiziano 56 Memory
4.4. DOWNLOAD OF VOICE MESSAGES AND FAX
When some voice messages or faxes are in the memory, the PWR led is red
continuous.
You can download the messages stored by connecting Tiziano 56 Memory
to the computer and activating the voice/fax application supplied with the
modem.
Before downloading, check the following:
1) the answering machine and the recorder function must be enabled;
2) the maximum time for the messages recording is more than 45".
After the application program has been enabled, Tiziano 56 Memory starts
the download of the messages first and then of the faxes. During the download
the PWR led turns red with a medium lightening.
Any voice message or fax is singularly downloaded and saved into the
computer application.Once the download is over, the messages or faxes are
cancelled from the modem memory; it means that if there is no power, no
voice message or fax is lost.
4.5. AT COMMANDS FOR MEMORY FUNCTION
By using a terminal emulation program you can send the following AT
commands to the digital section of Tiziano 56 Memory. These commands
manage the memory functioning.
Before sending these AT commands, check that the computer is interfaced
with the digital section of Tiziano 56 Memory.
Activate the terminal emulation program, send the AT$M0 command and
then the commands for the management of the memory function.
AT%D Download Management
Enables and disables the download of voice messages and faxes stored into
Tiziano 56 Memory.
AT%D0 Voice messages and faxes download disabled
AT%D1 Voice messages and faxes download enabled
AT%G Welcome Message Storage
This command stores the desired welcome message.
AT%G1 Stores the welcome message "Answer and Record"
AT%G2 Stores the welcome message "Answer Only"
Performance when Computer is Off
4.4