Digicom Tiziano 56 Memory User Manual page 18

TIZIANO 56 MEMORY
Some configuration examples
Modem set up with automode enabled and connection speed between
300 bps and 56000 bps:
The modem will connect at the maximum speed available if the interface
speed is equal or higher than the max rate (56.000bps).
If the computer speed is less than the max rate, the modem will connect at
the computer speed.
Modem set up in V.34 with automode disabled and speed fixed at 33.600
In this case the modem will connect only if the computer speed is equal or
higher than the speed setup in the AT+MS command.
The modem can handshake from V.32 (9600 bps) to V.21 (300 bps).
Standard Available speeds
V.90 56000, 54667, 53333, 52000, 50667, 49333, 48000, 46667,
45333, 44000, 42667, 41333, 40000, 38667, 37333, 36000,
34667, 33333, 32000, 30667, 29333, 28000
K56Flex 56000, 54000, 52000, 50000, 48000, 46000, 44000, 42000,
40000, 38000, 36000, 34000, 32000
V.34 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800,
14400, 12000, 9600, 7200, 4800, 2400
V.32bis 14400, 12000, 9600, 7200, 4800
V.32 9600, 4800
V.22bis 2400, 1200
V.22 1200
V.21 300
Bell 103 300
Bell 212 1200
AT%C DATA COMPRESSION CONTROL
%C0 Compression disabled.
%C1 MNP5 enabled only.
%C2 V42bis enabled only.
%C3 MNP% and V42bis enabled.
AT%E AUTORETRAIN CONTROL
%E0 Autoretrain disabled.
%E1 Autoretrain enabled.
AT+MS=12,1,300,56000
AT+MS=11,0,33600,33600
AT+MS=9,1,300,9600
3.6
Modem AT Command Set