Connection Messages - Digicom Tiziano 56 Memory User Manual

TIZIANO 56 MEMORY
ATS91 ADJUST TRANSMISSION LEVEL IN SWITCHED LINE
10-15 dB This register checks the modem transmission level in switched
line
Default=15
ATS92 ADJUST TRANSMISSION LEVEL IN FAX MODE
10-15 dB
mode.
Default=15
Note: Each change of S91 and S92 is automatically stored into the modem non volatile
memory.
3.5.

CONNECTION MESSAGES

S95 ATW0
0 CONNECT Dte
1 CONNECT Dce
2 CONNECT Dte/ARQ
4 CARRIER Dce
CONNECT Dte
8 PROTOCOL: Prot.
CONNECT Dte
32 COMPRESSION: Comp.
CONNECT Dte
Dce = Line Speed
Dte = Interface Speed
Comp. = V.42bis - MNP5 - NONE
Prot. = V.42 - LAPM - NONE
COMMAND DESCRIPTION
ATX List of available messages
ATW Answer message Format
ATS95 Connection message management
This register checks the modem transmission level in fax
PROTOCOL: Prot.
PROTOCOL: Prot.
PROTOCOL: Prot.
CONNECT Dte/Arq
PROTOCOL: Prot.
PROTOCOL: Prot.
PROTOCOL: Prot.
COMPRESSION:Comp
3.14
Modem AT Command Set
ATW1
CARRIER Dce
CONNECT Dte
CARRIER Dce
CONNECT Dce
CARRIER Dce
CARRIER Dce
CONNECT Dte
CARRIER Dce
CONNECT Dte
CARRIER Dce COMPRESSION: Comp.
CONNECT Dte
ATW2
CONNECT Dce
CONNECT Dce
CONNECT Dce/ARQ
CARRIER Dce
CONNECT Dce
PROTOCOL: Prot.
CONNECT Dce
CONNECT Dce