Table of Contents
Advertisement
TIZIANO 56 MEMORY
%E2
Fallback/fallforward enabled. Enabled only in error corrector or
buffer mode.
AT%L DISPLAY RECEIVE LEVEL IN DBM
Returns a value which indicates the received signal level.
Example 009 = -9 dBm, 043 = -43 dBm.
AT%Q LINE SIGNAL QUALITY
From 000 (good quality) to 127 (poor quality, troubled signal).
AT&C CARRIER DETECT OPTION
&C0
Carrier detect always ON. When modem disconnect DCD (C109)
goes OFF for 1 sec.; function 109 wink.
&C1
Carrier detect is ON when remote carrier is present.
AT&D
DATA TERMINAL READY OPTION
&D0
DTR signal is ignored.
&D1
Modem return to Command Mode upon detecting ON to OFF
transition on DTR.
&D2
Modem hangs up and disables auto-answer upon detecting ON
to OFF transition on DTR.
&D3
Modem reset upon detecting ON to OFF transition on DTR.
AT&F
FACTORY CONFIGURATION
&F0
Load factory configuration 0.
&F1
Load factory configuration 1.AT&G
AT&K DATA FLOW CONTROL
&K0
Flow control disable.
&K3
Hardware flow control (RTS/CTS) enabled (Default for data modem
modes).
&K4
Software flow control (Xon/Xoff) enabled.
&K5
Software flow control (Xon/Xoff) in trasparent mode enabled.
&K6
Hardware and software flow control enabled (default for fax modem
modes).
AT&P
MAKE/BREAK RATIO
&P0
39%-61% make/break ratio with 10 pulses per second.
&P1
33%-67% make/break ratio with 10 pulses per second.
Modem AT Command Set
3.7
GUARD TONE
Advertisement
Table of Contents
