Table of Contents
Advertisement
Chapter 12
Note:
Before you enable
VPN
Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static
IP address for router's WAN port and synchronize your
3. In the
Client IP Address
the devices by the PPTP VPN server.
4. In the
Username/Password
the PPTP VPN server.
5. Click Save.
Step 2. Configure PPTP VPN Connection on Your Remote Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the
as an example.
1. Go to
Start
>
Control Panel
2. Select
Set up a new connection or
System Time
filed, enter the range of IP addresses (up to 10) that can be leased to
filed, enter the username and password to authenticate clients to
>
Network and Internet
network.
Specify Your Network Settings
with internet.
Windows built-in PPTP software
>
Network and Sharing
Center.
71
Hide quick links:
Advertisement
Table of Contents
