Use The 4G Lte Router As A Dhcp Server - TP-Link TL-MR150 User Manual

300mbps wireless n 4g lte router
Hide thumbs Also See for TL-MR150:
Table of Contents

Advertisement

Chapter 12

12. 5. 2. Use the 4G LTE Router as a DHCP Server

You can configure the router to act as a DHCP server to assign IP addresses to its clients.
To use the DHCP server function of the router, you must configure all computers on the
LAN to obtain an IP Address automatically.
Follow the steps below to configure DHCP server.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced
3. Select
DHCP
to enable the DHCP function and select
4. Specify the
IP Address
same subnet with LAN IP. The router will assign addresses within this specified
range to its clients. It is from 192.168.1.100 to 192.168.1.199 by default.
5. Enter a value for the
of time in which a DHCP client can lease its current dynamic IP address assigned
by the router. After the dynamic IP address expires, the user will be automatically
assigned a new dynamic IP address. The default is 1440 minutes.
6. Keep the rest of the settings as default and click
Note:
1. The router can be configured to work as a
between computers that request IP addresses and the DHCP server that assigns the addresses. Each of the device's
interfaces can be configured as a DHCP relay. If it is enabled, the DHCP requests from local PCs will be forwarded to
the DHCP server that runs on WAN side.
2. You can also appoint IP addresses within a specified range to devices of the same type by using
feature. For example, you can assign IP addresses within the range (192.168.1.50 to192.168.1.80) to Camera devices,
thus facilitating the network management. Enable DHCP feature and configure the parameters according to your
actual situation on
Advanced
>
Network
>
LAN Settings
Pool, the start address and end address must be on the
Address Lease
Time. The
DHCP
Relay. A DHCP relay is a computer that forwards DHCP data
>
Network
>
LAN Settings
Specify Your Network Settings
page.
DHCP
Address Lease Time
Save
to make the settings effective.
page.
Server.
is the amount
Condition Pool
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents