Table of Contents
Advertisement
Chapter 12
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Basic
>
Wireless
•
To enable or disable the wireless function:
Enable the
Wireless Network
uncheck the box. If you disable the wireless function, all the wireless settings won't be
effective.
•
To change the wireless network name (SSID) and wireless password:
Enter a new SSID. The default SSID is TP-Link_XXXX and the value is case-sensitive.
Note:
If you use a wireless device to change the wireless settings, you will be disconnected when the settings are effective.
Please write down the new SSID and password for future use.
•
To hide SSID:
Select Hide SSID, and your SSID will not broadcast. Your SSID won't display when you
scan for local wireless network list on your wireless device and you need to manually
join the network.
•
To change the mode or channel:
Go to
Advanced
>
Wireless
•
Mode
- Select the desired mode.
•
802.11n only
•
802.11gn mixed
clients.
•
802.11bgn mixed
wireless clients.
Note:
When 802.11n only mode is selected, only 802.11n wireless stations can connect to the router. It is strongly
recommended that you select 802.11bgn mixed, and all of 802.11b, 802.11g, and 802.11n wireless clients can
connect to the router.
•
Channel
- Select the channel you want to use from the drop-down list. This field
determines which operating frequency will be used. It is not necessary to change
page.
2.4GHz. If you don't want to use the wireless function, just
>
Wireless Settings
- Select only if all of your wireless clients are 802.11n devices.
- Select if you are using both 802.11g and 802.11n wireless
- Select if you are using a mix of 802.11b, 11g, and 11n
Specify Your Network Settings
page.
59
Hide quick links:
Advertisement
Table of Contents
