Communication Port - Dukane 9080WUSS User Manual

Command Control via the Network
When the projector connects network, the projector can be controlled with RS-232C
commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network command table.
Connection
Turn off the projector and the computer.
1.
If you use wired LAN, connect the projector's HDBaseT
2.
HDBaseT port with a LAN cable. Use the cable that fulfills the specification shown in figure.
Turn the computer on, and after the computer has started up turn the projector on.
3.

Communication Port

The following two ports are assigned for the command control.
TCP #23
LAN
LAN or
HDBaseT port
• LAN cable (CAT-5e or greater)
or
• For HDBaseT connection
- CAT-5e or greater
- shielded type (connectors included)
- straight cable
- single cable
Communication settings
TM
port to the computer's LAN or
73