Dukane 9007WU User Manual
  1. Manuals
  2. Brands
  3. Dukane Manuals
  4. Projector
  5. 9007WU
  6. User manual

Dukane 9007WU User Manual

Hide thumbs Also See for 9007WU:
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
9005 / 9006W / 9007WU
User's Manual (detailed)
Instant Stack Guide
Thank you for purchasing this product.
Features
This projector can be used with another projector of the same model to project an
image on the same screen using the Instant Stack feature.
The two projectors can be operated simultaneously to make the image brighter.
Moreover, if you connect two projectors with RS-232C cross-over cable, it turns to
a kind of intellectual stacking system.
These features, generically called Instant Stack, provide you with the broad use.
A b o u t t h i s m a n u a l
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING
CAUTION
NOTICE
WARNING ►Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
►Follow all the instructions in the manuals or on the product. The manufacturer
assumes no responsibility for any damage caused by mishandling that is beyond
normal usage defined in the manuals.
NOTE
• The information in this manual is subject to change without notice.
•The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
All the trademarks in this manual are the properties of their respective owners.
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result
in personal injury or physical damage due to incorrect handling.
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.
1

Advertisement

Table of Contents
loading

Related Manuals for Dukane 9007WU

Summary of Contents for Dukane 9007WU

  • Page 1 Projector 9005 / 9006W / 9007WU User's Manual (detailed) Instant Stack Guide Thank you for purchasing this product. Features This projector can be used with another projector of the same model to project an image on the same screen using the Instant Stack feature.

  • Page 2: Table Of Contents

    Contents   1. Introduction ......3 3. STACK menu settings ..13 1.1 Basic information 3.1 Displaying STACK menu .... 13 and preparations ......3 3.2 Selecting Main, Sub or off ..14 Instant Stack ........3 3.3 Selecting input source for Sub..17 Intellectual Stack and Simple Stack ..

  • Page 3: Introduction

    1. Introduction 1.1 Basic information and preparations Instant Stack Instant Stack is a feature that allows you to superimpose images projected from two projectors easily. Intellectual Stack and Simple Stack Instant Stack includes the following two features. When two projectors are connected via an RS-232C cable with necessary set- tings performed on the projectors, these two projectors will automatically operate in synchronization with each other according to the settings.
  • Page 4 Introduction 1.1 Basic information and preparations (continued) NOTICE ► Intellectual Stack can be operated only in pairs of the same model projectors. ► A maximum of two projectors can be used as Intellectual Stack. ► Please use the same type of lens for both projectors. ►...

  • Page 5: Installation

    2. Installation For safety reasons, read 1.1 Basic information and preparations ( 3, 4 ) carefully before installation. In addition, take note of the followings for proper use of Instant Stack. ● Use the same model projectors. Screen ● Arrange the projectors side by side. size ●...

  • Page 6: Installing The First Projector (Set A)

    Installation 2.2 Installing the first projector (Set A) Deciding installation position Decide the position of Set A and its projection angle. (User’s Manual (concise) → Arrangement and Adjusting the projector’s elevator) WARNING ►It is possible to install the projector for any direction with specified mounting accessories.
  • Page 7 Installation 2.2 Installing the first projector (Set A) - Setting up Set A (continued) Display the menu with the MENU button. (Operating Guide → Using the menu function) Use the ▲/▼/◄/► buttons to go into the following menu. ADVANCED MENU > OPTION >...

  • Page 8: Installing The Second Projector (Set B)

    Installation 2.3 Installing the second projector (Set B) Deciding installation position Decide the position of Set B and its projection angle. (User’s Manual (concise) → Arrangement and Adjusting the projector’s elevator) WARNING ►It is possible to install the projector for any direction with specified mounting accessories.
  • Page 9 Installation 2.3 Installing the second projector (Set B) - Setting up Set B (continued) Adjust the image size and position of Set B with the ZOOM, FOCUS and LENS SHIFT features such that the image can be superimposed well to the image of Set A.

  • Page 10: Confirming Main And Sub Settings

    Installation 2.4 Confirming Main and Sub settings Press the MENU button on the remote control for Main (Set B). NOTE • When Intellectual Stack is in use, only Main is capable of receiving the remote control signals, Sub will not respond to the remote control signals. The following dialogs appear on the lower right screen.

  • Page 11: Fine Adjusting Image Position

    Installation 2.5 Fine adjusting image position To superimpose the images of Main (Set B) and Sub (Set A), fine adjust the image size and position of Main (Set B) using PERFECT FIT. For Intellectual Stack users Main (Set B) Press the MENU button on the remote control or the control panel on Main (Set B) to display the MENU dialog.

  • Page 12: For Simple Stack Users

    Installation For Simple Stack users Press the MENU button on the remote control to display the menu on Set A. Use the ▲/▼/◄/► buttons to open the TEMPLATE STACK of TEMPLATE dialog, then select STACK on the dialog. (Operating Guide → SCREEN menu) Press the MENU button on the control panel of Set B to display the menu.

  • Page 13: Stack Menu Settings

    3. STACK menu settings Set the Intellectual Stack operation using the STACK menu. • If you are using Simple Stack without RS-232C connection, skip this NOTE chapter. • Read 3.5 Important information for Intellectual Stack carefully. ( 19 ) 3.1 Displaying STACK menu Use the ▲/▼/◄/►...

  • Page 14: Selecting Main, Sub Or Off

    STACK menu settings 3.2 Selecting Main, Sub or off To enable Intellectual Stack, select either MAIN or SUB. Intellectual Stack starts when one projector is set to MAIN and the other is set to SUB in the STACK MODE dialog. To disable Intellectual Stack, select OFF. Highlight STACK MODE in the STACK menu with the ▲/▼...
  • Page 15 STACK menu settings 3.2 Selecting Main, Sub or off (continued) • A menu to select MAIN or SUB appears on screen when a button NOTE on the control panel of the projector or remote control is pressed. Select the projector that you want to operate. Refer to the examples below. - When the MENU button is pressed, a menu to select MAIN or SUB is displayed.
  • Page 16 STACK menu settings 3.2 Selecting Main, Sub or off (continued) NOTE • The images projected from the Main and Sub projectors may be different. It is recommended to set the projectors as follows. - Set the same image for TEMPLATE and START UP on the Main and Sub projectors.

  • Page 17: Selecting Input Source For Sub

    STACK menu settings 3.3 Selecting input source for Sub Highlight SUB INPUT SOURCE in the STACK menu with the ▲/▼ buttons, then press the ► button to display the SUB INPUT SOURCE dialog. Use the ▲/▼ buttons in the dialog to highlight FOLLOW MAIN UNIT or FIXED (COMPUTER IN 1).

  • Page 18: Exiting Intellectual Stack Menu

    STACK menu settings 3.4 Exiting Intellectual Stack menu Before exiting menu operation for Intellectual Stack, it is recommended to check all the settings in the STACK menu. For dialogs that are called from the STACK menu, you can press the ◄ button to return to the STACK menu. Refer to the following to exit menu operation for Intellectual Stack.

  • Page 19: Important Information For Intellectual Stack

    STACK menu settings 3.5 Important information for Intellectual Stack This section provides important information for setting up the Main and Sub projectors, not explanations on operating the menus. Read all information carefully. ● To use Intellectual Stack, one projector must be set to Main and the other set to Sub.
  • Page 20 STACK menu settings 3.5 Important information for Intellectual Stack (continued) - MY BUTTON (Operating Guide → OPTION menu) - TEMPLATE (Operating Guide → SCREEN menu) - SHUTTER (Operating Guide → Temporarily shading the screen) - SHUTTER TIMER (Operating Guide → OPTION menu) - PbyP/PinP (Operating Guide →...
  • Page 21 STACK menu settings 3.5 Important information for Intellectual Stack (continued) Example: - Cover Error: Lamp cover is opened. - Lamp Error: Lamp-1 and Lamp-2 do not light - Lamp-1 Warning: Lamp-1 does not light up. - Lamp-2 Warning: Lamp-2 does not light up. - Fan Error: Problem with cooling fan.

  • Page 22: Connecting Cables

    4. Connecting cables To superimpose two images onto one screen, the same image must be input to the Main and Sub projectors. There are various methods to input the image to the projectors. This chapter describes the ways of connecting the cables. Read this chapter to find a method that meets your needs.

  • Page 23: Connecting Signal Cables

    Connecting cables 4.2 Connecting signal cables There are two methods to input image to the Sub projector. ( 17 ) - Inputting image from the MONITOR OUT port on Main to Sub. - Inputting image to Sub and Main individually. Inputting image from Main to Sub Connect the MONITOR OUT port on Main to the COMPUTER IN1 port on Sub with a...

  • Page 24: Setting Input Ports Using Menu

    5. Setting input ports using menu 5.1 Preparing for menu operations If Simple Stack without an RS-232C connection is used, press the button corresponding to the port on the remote control or the INPUT button on the projector to select the port to which the cable is connected. For setting of MONITOR OUT, refer to SETUP menu in Operating Guide.

  • Page 25: Setting The Menu

    Setting input ports using menu 5.3 Setting the menu If Intellectual Stack with RS-232C connection is used, observe the followings. When inputting image signals to Sub via Main, the operations differ between using computer signals and video signals such as component and video signals. Inputting image from Main to Sub - Computer signal If the STACK menu is already displayed on the screen, proceed to 3 below.

  • Page 26: Inputting Image From Main To Sub - Video Signal (Either Component Or Video)

    Setting input ports using menu Inputting image from Main to Sub - Video signal (either component or video) If the STACK menu is already displayed on the screen, proceed to 3 below. Otherwise press the MENU button on the remote control. If the MENU dialog is displayed, use the ▲/▼...
  • Page 27 Setting input ports using menu 5.3 Setting the menu - Inputting image to Sub and Main individually (continued) Use the ▲/▼ buttons to highlight SUB INPUT SOURCE, and press the ► button to display the SUB INPUT SOURCE dialog. Use the ▲/▼ buttons to highlight FOLLOW MAIN UNIT, and press the ►...

  • Page 28: Restrictions On Schedule Function

    6. Restrictions on Schedule function This model supports the Schedule function on the Projector Web Control feature. (Network Guide → 3.1.7 Schedule Settings) There are some restrictions on the functions when Intellectual Stack with RS-232C connection is used. But for Simple Stack without an RS-232C connection, there is no restriction on the functions.
  • Page 29 Restrictions on Schedule function 6. Restrictions on Schedule function (continued) • If the Schedule is not executed, an error message will be sent in NOTE accordance with the conditions set in Schedule Execution Error on Projector Web Control. (Network Guide → 3.1.6 Alert Settings) •...

  • Page 30: Troubleshooting

    7. Troubleshooting About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomena that may be easy to be mistaken for machine defects Reference Phenomenon Cases not involving a machine defect page No power is supplied to the Main and Sub projector.
  • Page 31 Troubleshooting 7. Troubleshooting (continued) Reference Phenomenon Cases not involving a machine defect page The settings on the projectors are not set for the Intellectual Stack feature. Check the following settings on the Main and Sub projectors. The STACK - STANDBY MODE in SETUP menu: menu does not 5 NORMAL...

This manual is also suitable for:

9006w9005

Table of Contents