Dukane 9080WUSS User Manual page 56

OSD Menu description
SETUP
MAIN
PICTURE
LASER
ADVANCED
SETUP
SERVICE
Network
Network Mode
•
Projector Control : Choice this fuction to control the projector via the web.
Service : This function only for the professional service person. For download command use.
Standby Power
•
Off : Set off, Power consumption 0.5W. Can't operate the projector via the web when projector is in
standby mode.
On: Set on, Even if the projector is in standby mode, you can control the projector via the web.
Power consumption is more than "Off".
DHCP
•
If the projector installation environment has the Dynamic Host Configuration Protocol server. You
can set this function "ON" to let the projector get the auto ID from server. If no DHCP, even you set
"ON" for this function. You still need to input the projector ID by yourself.
IP Address
•
If has DHCP server and the function is on. The ID address will auto display here , or you need to
enter ID by yourself.
Subnet Mask
•
If has DHCP server and the function is on. The Subnet Mask address will auto display here , or you
need to enter it value by yourself.
Gateway
•
If has DHCP server and the function is on. The Gateway address will auto display here , or you
need to enter it value by yourself.
DNS
•
If has DHCP server and the function is on. The DNS address will auto display here , or you need to
enter it value by yourself.
MAC Address
•
56
Network
OSD Settings
Infrared Remote
Remote ID
Startup Logo
Trigger
Auto Search
Auto Power Off
Direct Power On
Language
AMX D.D.
: Read only.
ENTER
ENTER
On
0
On
Screen
Off
Off
OFF
English
Off