Power Led; Status Led; Light (Led) - Dukane 9080WUSS User Manual

LED STATUS

Power LED

LED Display
Off
Green
Flashing
Orange
Red
On
Green

Status LED

LED Display
Off
Red (Cycles of 1) Error in warming up
Flashing
Red (Cycles of 4) Projector cooling after error
On Red
Light LED
LED Display
Off
Green
Flashing
Red (Cycles of 6) laser lit fail
Red
On
Green
Temp. LED
LED Display
Off
Flashing Red
Remark:
The time period of each step in the above LED blinking pattern is 500 milliseconds, e.g., for "Cooling / Warming up" state, the
green LED will ON for 500 milliseconds, and then OFF 500 milliseconds, and then repeat the above LED pattern.
Simple troubleshooting and definition of
Projector Status
Power is off
Projector warming up
Projector cooling
Standby mode
Projector is on
Projector Status
No Problem
Standby mode with error
Projector Status
Laser is off
Prepare to light laser
Laser is end-of-life
Laser is on
Projector Status
No Problem
Temperature problem
the LED indicators
Procedure
wait till projector start displaying
wait until cooling finish ( ~ 10 sec)
Procedure
If the problem occurs again after
retrying, please contact your dealer
or service.
Procedure
Procedure
If the problem occurs again after
retrying, please contact your dealer
or service.
65