Color Space - Dukane 9080WUSS User Manual

OSD Menu description

Color Space

Select Color Space from the Advanced menu to choose the color space of the source signal for HDMI,
COMPUTER IN, and component connections.
The default setting, Auto, functions as follows:
Auto
•
The Auto setting determines the correct color space to be used automatically. For HDMI input,
this determination is based on the AVI infoframe conveying in the input signal. For other input
sources, this determination is based on the timing format of the input signal, for PC/IT formats,
RGB color space will be used, for CE/Video formats, REC601 or REC709 will be used. If the auto
setting dose not determine a correct color space matching the input source signal for some reason,
you can force the Projector to use a specific color space. Choose one of the following:
REC709
•
sets the color space matrix to that defined in ITU-R BT.709.
REC601
•
sets the color space matrix to that defined in ITU-R BT.601.
RGB PC
•
uses RGB color space and sets black at 0,0,0 RGB and white at 255,255,255 RGB.
RGB Video
•
uses RGB color space and sets black at 16,16,16 RGB and white at 235,235,235.
Note: When SDI input is selected, this function is not available.
3D
For setting the 3D Video each value.
3D Format
•
Default is "Auto". When 3D image is not display. Mean the input signal does not contain 3D
detection signal or it can't be detected by the projector. This time, you need to select the correct 3D
format manually. There has Off / Auto / Side by Side (Half) / Top and Bottom / Frame Sequntial
can choice.
Eye Swap
•
Choice "Normal" or "Reverse" to display the correct picture.
DLP Link
•
This projetor only support DLP Link glassers. If your 3D Glasses is not DLP Link format, set this
function "Off".
Magnify & Shift
• Magnify : Zoom in the projected image.
• Horz Shift : Horizontal direction to shift the projected image.
• Vert Shift : Vertical direction to shift the projected image.
• Reset : Clear all settings of Magnify & Shift.
No Signal
Use this function to specify the content or color to be displayed on the blank screen when no input
signal is available. You can choose from Logo, Blue, Black, White. The default value is Logo.
40