Osd Description - Dukane 9080WUSS User Manual

OSD Menu description

OSD Description

1. Press the MENU button on the remote control or on the side of the projector to bring up the OSD Menu.
2. You will see six functional menus (Main, Picture, Laser, Advanced, Setup and Service).
▲ ▼
3. Press or
4. Your current selection in each of the sub menu will be displayed in black text and highlighted in orange. Press ► or
ENTER
to access the configuration for the selected item or press
5. Press MENU
6. From the main menu, press
7. Some items do not work at the condition of Source, Input signal and Menu setting.
8. Picture may be incorrect when the parameter value is exceeded.
MAIN
MAIN
PICTURE
LASER
ADVANCED
SETUP
SERVICE
Input
This function is same as the hotkey which on Remote controller. You can use remote controller or this
function to select the correct input source.
HDMI1/HDMI2
•
HDMI input from PC or media device.
Computer In 1
•
Analog RGB from PC.
Computer in 2 / 5BNC
•
Analog interface from media device.
HDBaseT
•
Uncompressed digital video from RJ45.
SDI
•
Uncompressed digital video from a serial connection (coaxial).
DVI-D
•
DVI input from PC.
38
to select the desired sub menu.
to return to the previous menu.
MENU to close the OSD Menu.
Input
PinP
PinP Selection
PinP Position
Color Space
3D
Magnify & Shift
No Signal
ENTER
to go to another sub menu.
DVI-D
Off
HDMI 2
Top
Right
Auto
ENTER
ENTER
Logo