Fuji Xerox DocuPrint P385 dw Reference Manual page 6

2. Data LED
The Data LED blinks depending on the machine's status.
When the Data LED is on, data is in the machine's memory. When the Data LED blinks, the
machine is receiving or processing data.
3. Error LED
The Error LED blinks when the LCD displays an error or an important status message.
4. Menu Buttons
OK
Press to store your machine's settings. After you change a setting, the machine returns to
the previous menu level.
Back
• Press to go back one level in the menu.
• Press to select the previous digit when entering numbers.
▲ or ▼ (+ or -)
• Press to scroll through menus and options.
• Press to enter a number or to increase or decrease the number. Hold down ▲ or ▼ to
scroll faster. When you see the number you want, press OK.
5. Secure
Press to print jobs saved in the memory when you enter your four-digit password.
6. Go
• Press to clear certain error messages. To clear all other errors, follow the LCD instructions.
• Press to print any data remaining in the machine's memory.
• Press to select the displayed option. After you change a setting, the machine returns to
Ready Mode.
7. Cancel
• Press to cancel the current setting.
• Press to cancel a programmed print job and clear it from the machine's memory. To cancel
multiple print jobs, hold down Cancel until the LCD displays [Cancel All Jobs].
8. Power On/Off
• Turn the machine on by pressing
• Turn the machine off by pressing and holding down
Down] for a few seconds before going off.
9. Network buttons
• DocuPrint P375 d:
Network
Press the Network button to set up wired network settings.
.
. The LCD displays [Shutting
5