Table of Contents
Advertisement
Chapter 3
Communication Ports
Figure 26: EVDO Cellular Modem
The EVDO cellular modem has the following minimum requirements:
Band
Cell
PCS
Contact Verizon for information about account activation.
Section 3.9.2
HSPA (GSM) Cellular Modem
The HSPA card option is available for use on various GSM-based networks. The card supports GSM, GPRS,
EDGE, UMTS and WCDMA/HSDPA/HSUPA. The Main and Receive Diversity antenna connections are made to
the 50 Ω SMA connectors located on the front faceplate.
Figure 27: HSPA Cellular Modem
1. Receive Diversity Antenna SMA Connector
Installing a SIM Card
SIM card access is available on the front faceplate of the HSPA module. Follow these steps to install a SIM card:
1.
Disconnect power from the device.
2.
Remove the protective cover marked HSPA.
3.
Insert the SIM card with the angled side first. An audible click will indicate the SIM card is in position.
4.
Slide the latch over the SIM card to secure it in place.
5.
Install the protective cover.
6.
Connect power to the device.
28
1
Frequency Range (MHz)
Tx
Rx
824-849
869-894
1850-1910
1930-1990
1
2. Access Panel
2
VSWR
<2:1
2
3
3. Main Antenna SMA Connector
RUGGEDCOM RX1000P
Installation Guide
Maximum
RX Diversity
Allowable
Support
Gain (dBi)
<2:1
4.95
3.55
HSPA (GSM) Cellular Modem
Advertisement
Table of Contents
