note
The projector must be
plugged in (projecting or in
standby mode) for you to be
able to connect to it.
To access a projector in
standby mode, you must
select
as the
Network ON
setting in
Standby Mode
the projector's menu system
(see page 76).
Managing the Projector from a Remote Computer
94
Creating the E-Mail Settings
1. If
EMP NetworkManager
the Start menu.
You see your registered projectors displayed as shown:
2. Double-click the icon for the projector whose e-mail settings you
want to create. Enter your password, if you created one (see
page 93).
3. EMP NetworkManager connects to the projector, and you see
this screen:
4. Verify that the network settings are correct.
Make any desired changes to the projector's network address
■
configuration (turning off DHCP enables the manual
settings).
is not already running, open it from