Epson PowerLite 9300i User Manual page 70

Preset
button
Fine-tuning the Projector
70
4. Adjust the
Sync
left or right side of the
the tracking first for best results.)
■ Resolution (in the Video menu)
If your image is distorted (compressed, stretched, partially cut off,
or doesn't completely fill the display area), the projector's
resolution setting may not match that of your computer. Select
to let the projector adjust the resolution automatically; or
Auto
select and then press
Manual
■ Position (in the Video menu)
If the image is slightly cut off on one or more sides, it may not be
centered exactly. You can use this setting to center it.
■
Preset (in the Video menu)
Once you've fine-tuned the settings in the Video menu for the
computer you're using, you can save them as a group, using of one
of the ten settings:
Preset
1. From the Video menu, select
2. Select a number (1 to 10).
3. Press , then select
Enter
4. Press to exit the menu system.
E
SC
The next time you use the same computer, simply press the
button on the remote control to recall your saved settings.
Preset
(Press the button repeatedly to select the number
Preset
corresponding to the Preset setting you want to use.)
setting to reduce blurriness by pressing the
pointer button. (Be sure to adjust
to adjust the setting yourself.
Enter
and press
Preset
to overwrite.
Yes
.
Enter