Epson PowerLite 9300i User Manual page 25

Connecting Using a BNC Cable
1. Locate a BNC video cable (one may be included with your video
equipment).
2. Connect the cable to your player and the corresponding
connectors on the projector.
3. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4. If you don't need to make any other connections, see Chapter 2
for instructions on turning on the projector and adjusting the
image. Once the projector is turned on, be sure to:
■ Enter the projector's Setting menu, then change the BNC
Input setting to
After exiting the menu system, select
■
your image (see page 38).
(see page 75).
RGB-Video
BNC
R/G/B
as the source to see
Setting Up the Projector
25