Table of Contents
Advertisement
Product Overview
Specifications
Cutting Unit
8 blade
11 blade
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Weight
67 kg (147 lb)
69 kg (151 lb)
10
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Adjusting the Cutting Unit
Adjusting the Rear Shield
Under most conditions, best dispersion is attained
when the rear shield is closed (front discharge). When
conditions are heavy or wet, the rear shield may be
opened.
To open the rear shield
screw securing the shield to the left side plate, rotate
the shield to the open position, and tighten the cap
screw.
1. Rear shield
Checking the Cutting Unit
The dual knob bedknife-to-reel adjustment system
incorporated in this cutting unit simplifies the
adjustment procedure needed to deliver optimum
mowing performance. The precise adjustment
possible with the dual knob/bedbar design gives
the necessary control to provide a continual
self-sharpening action—thus maintaining sharp
cutting edges, ensuring good quality of cut, and
greatly reducing the need for routine backlapping.
(Figure
15), loosen the cap
Figure 15
2. Cap screw
g003316
Advertisement
Table of Contents
