Zenith G4 User Manual page 4

IS - Two Button
Tap operation
IMPORTANT:
Before operating the two button tap, follow the steps,
on page 2 to ensure the safety setting has been changed to [Disable].
No boiling water will be dispensed unless the internal safety is set to [Disable].
Boiling water:
(with safety disabled)
The two button tap has NO safety button, therefore boiling water may be
dispensed by pressing the RED button. Water will flow from between 5 and
15 seconds (This is user adjustable). Releasing the button will stop the flow
of water and will allow the unit to reset for repeat operations.
Chilled water:
Pressing the "BLUE" button allows the dispensing of chilled water. Water will
flow from between 5 and 15 seconds (This is user adjustable). Releasing the
button will stop the flow of water and will allow the unit to reset for repeat
operations.
Upper RED button for
dispensing boiling water
Lower BLUE button for
dispensing chilled water
Page 4 of 24 802743NZ - HT G4-BC-IS-IT, User Guide - Aug 2015 - V2.00