Table of Contents

Advertisement

194
MAINTENANCE
Comply with the operating
instructions of the charger.
Once the battery is fully
charged, disconnect the
charger's terminal clips from
the battery terminals.
The battery has to be
recharged at regular
intervals in the course of a
lengthy period of disuse. See
the instructions for caring
for your battery. Always fully
recharge the battery before
restoring it to use.
Connecting battery to motor-
cycle (
193).
Removing battery
Remove the rider's seat
(
62).
Disconnecting battery from
motorcycle (
Lift the battery up and out:
work it slightly back and forth
if it is difficult to remove.
Installing battery
If the vehicle has been
disconnected from the
battery for a significant time,
the current date will have to
be entered in the instrument
cluster to guarantee correct
operation of the service display.
193).
Place the battery in the bat-
tery compartment; positive
terminal on the left in the dir-
ection of travel.
Connecting battery to motor-
cycle (
193).
Install the rider's seat (
Set the clock (

FUSES

Replacing fuses
Switch off the ignition.
Remove the rider's seat
(
62).
ATTENTION
Jumpering of blown fuses
Risk of short-circuit and fire
Never attempt to jumper a
blown fuse.
Always replace a defective
fuse with a new fuse of the
same amperage.
Replace faulty fuse in accord-
ance with the fuse allocation
diagram.
62).
74).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents