BMW M 1000 RR 2021 Rider's Manual page 126

120 RIDING
ATTENTION
Trapping of components
Component damage
Do not trap components
such as brake lines or cable
legs.
At the front, loop a strap over
the bottom fork bridge on
each side.
Pull the straps down and
tight.
At the rear, secure the straps
to the rear frame on both
sides and tighten the straps.
Tighten all the straps
uniformly; the vehicle's
suspension should be
compressed as tightly as
possible front and rear.
After transport, position fork
partition 2 and install bolts 1.
Fork partition to fork
bridge, bottom
Thread-locking compound:
micro-encapsulated
2 Nm