BMW M 1000 RR 2021 Rider's Manual page 140

134 ON THE RACE TRACK
control value 2 is displayed in-
stead.
Press rocker button 1 up-
wards briefly in order to in-
crease DTC control.
WARNING
Loss of stability because of
rear wheel spinning when
DTC control is reduced.
Risk of falling
Reduce DTC for riding on
racing circuits only.
Only change DTC control
by one level at a time and
carefully test the effects on
drivability.
Press DTC rocker button 1
downwards briefly in order to
reduce DTC control.
The set value is shown in the
display and is between
and :
7
: Reduce slip at the rear
1 ... 7
wheel in a maximum of seven
stages. is the value corres-
7
ponding to earliest DTC inter-
vention.
-1 ... -7
rear wheel in a maximum of
seven steps.
corresponding to latest DTC
intervention.
: Works default setting
0
DTC
switched off.
DTC deactivation
On very loose surfaces (for ex-
ample in a gravel trap of a race
track), the DTC's attempts to
control propulsive power might
reduce drive to the extent that
the rear wheel no longer turns.
Under these circumstances,
BMW Motorrad recommends
temporarily switching off DTC.
Bear in mind that the rear
wheel will spin on the loose
surface and close the throttle in
good time before you reach a
firm surface.
Traction control and wheelie
suppression are also switched
off by switching off DTC.
Then reactivate DTC.
Switching off DTC (
-7
: Increase slip at the
is the value
-7
display hidden: DTC
50)